The bits in the mask identify both hosts and subnets. The more hosts, the fewer subnets; the more subnets, the fewer hosts can be individually addressed. These bits become a tradeoff based on the ...

To connect some copiers or multi-function printers to a router, you may need to know the subnet mask value for the network. A subnet mask defines the value range of IP addresses used in a workgroup.

We have a pretty simple network at the moment that is going to get a lot more complex soon, so I'm trying to take it little steps at a time. All sites are connected via an AT&T MPLS, with one public ...

The mask Class A subnet masks must start with 255.0.0.0 at a minimum, because the whole first octet of an IP address (the IP address describes the specific location on the network) is used to define ...

If computers in an open network talk freely with one another and two computers start talking at the same time, you have a “data collision.” Collisions may be arbitrated via Carrier Sense Multiple ...

Subnetting a Class B network can involve some serious thought! As a network administrator, you'll have to know it and know it well. Todd Lammle walks you through clear instructions and simple examples ...

When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works. One of the most prevalent problems with IP networks occurs when IP subnet masks are incorrect.

The following summarizes how networks, subnetworks and hosts are identified in the TCP/IP protocol. An IP address is first divided between networks and hosts. The host bits are further divided between ...

For one to be able to create multiple logical networks within a Class A, B, or C network, one needs to know the principle of subnet. Without using subnets, one could only use a single network no ...