This application note provides an in-depth discussion of the soldering process and how it relates to leaded LED lamps and display components, with the objective of serving as a guide to achieving high ...

Mini LED chips can measure as small as 50μm × 100μm, with pad spacing as narrow as 5-50μm, demanding extreme precision in ...

Soldering is the process of using a metal alloy with a low melting temperature (solder) to fuse the electrical contacts of a component to the pads of a circuit board. Proper soldering maximizes the ...

Improves wetting: Flux helps molten solder flow smoothly (or “wet”) across the surfaces, promoting even coverage and a strong ...

Kamstrup, a Danish manufacturer of smart water meters, is using selective soldering equipment from Nordson Electronics ...

When electronic components are mounted onto a printed circuit board, they are subsequently visually inspected to ensure they are mounted correctly. Historically, these boards were photographed with a ...

Tombstoning is a defect where a two-leaded, wrap-around lead-style termination chip component fails to lay down appropriately and allow solder to simultaneously make a required electrical/mechanical ...

It’s been a while since we’ve had a fresh How-To on the Hack-A-Day, and frankly we’ve missed them. To get things rolling, [Eliot] and I wanted to build a good knowledge base to help you hack your own ...

Video distribution amplifiers are used to amplify a video signal and split it into multiple outputs so multiple displays can be driven. They are also used to correct the gain of an incoming video ...